manualshive.com logo in svg

HP ML370 - ProLiant - G3, Reference And Troubleshooting Manual

The HP ML370 ProLiant G3 is a powerful server designed for optimal performance and reliability. With our comprehensive user manual, you'll have a detailed overview of its features and functions. Download it for free from our website, and get started with this exceptional product right away.

Share
Download
background image

 Troubleshooting 

203 

 

Controller is Located in Special "Video" Slot 

Description: Controller is installed in the slot for special video control signals. If 
the controller is used in this slot, LED indicators on front panel may not function 
properly. 

Action: Install the controller into a different slot, and run the server setup utility 
to configure NVRAM. Then, run ACU to configure the controller. 

 

Controller Is Not Configured 

Description: Controller is not configured. If the controller was previously 
configured and you change drive locations, there may be a problem with 
placement of the drives. ADU examines each physical drive and looks for drives 
that have been moved to a different drive bay. 

Action: Look for messages indicating which drives have been moved. If none are 
displayed and drive swapping did not occur, run ACU ("Array Configuration 
Utility" on page 

115

) to configure the controller and server setup utility to 

configure NVRAM. Do not run either utility if you believe drive swapping has 
occurred. 

 

Controller Reported POST Error. Error Code: X 

Description: The controller returned an error from its internal POST. 

Action: Replace the controller. 

 

Controller Restarted with a Signature of Zero 

Description: ADU did not find a valid configuration signature to use to get the 
data. NVRAM may not be present (unconfigured) or the signature present in 
NVRAM may not match the signature on the controller. 

Action: Run the server setup utility to configure the controller and NVRAM. 

 

 

Summary of Contents for ML370 - ProLiant - G3






























































































































































































































































































































Reviews:

No comments

Related manuals for ML370 - ProLiant - G3

NEC Univerge SV9300 Programming Manual preview
Univerge SV9300
Brand: NEC Pages: 47
NEC Univerge SV9100 Manual preview
Univerge SV9100
Brand: NEC Pages: 766
Western Digital WD Caviar Green WD10EADS Specification Sheet preview
WD Caviar Green WD10EADS
Brand: Western Digital Pages: 2
H3C UniServer R6900 G5 Installation, Quick Start preview
UniServer R6900 G5
Brand: H3C Pages: 17
Digisol DG-BG4100NU Quick Installation Manual preview
DG-BG4100NU
Brand: Digisol Pages: 22
IBM 88743BU - System x3950 E User Manual preview
88743BU - System x3950 E
Brand: IBM Pages: 426
IBM TS7650 PROTECTIER DEDUPLICATION APPLIANCE Installation Roadmap Manual preview
TS7650 PROTECTIER DEDUPLICATION APPLIANCE
Brand: IBM Pages: 218
IBM BladeCenter HS20 Type 8843 Installation And User Manual preview
BladeCenter HS20 Type 8843
Brand: IBM Pages: 112
Pullnet AGENT-2 S41D Line User Manual preview
AGENT-2 S41D Line
Brand: Pullnet Pages: 89
Rocstor ROCPRO 225 User Manual preview
ROCPRO 225
Brand: Rocstor Pages: 45
Stephen SON8010U User Manual preview
SON8010U
Brand: Stephen Pages: 8
Sun Microsystems Sun Fire Netra 1280 Product Notes preview
Sun Fire Netra 1280
Brand: Sun Microsystems Pages: 10
RIOT CloudLink Installation Manual preview
CloudLink
Brand: RIOT Pages: 18
EnGenius ESR-1221N Specifications preview
ESR-1221N
Brand: EnGenius Pages: 6
Samsung SN-324 User Manual preview
SN-324
Brand: Samsung Pages: 5
Samsung SM863a Handling Manual preview
SM863a
Brand: Samsung Pages: 10
Samsung MZ7LN256HMJP Handling Manual preview
MZ7LN256HMJP
Brand: Samsung Pages: 10
Samsung SM843T Series User'S Information Manual preview
SM843T Series
Brand: Samsung Pages: 15

Brands by name

Popular brands

Load more brands