manualshive.com logo in svg

HP ML370 - ProLiant - G3, Reference And Troubleshooting Manual

The HP ML370 ProLiant G3 is a powerful server designed for optimal performance and reliability. With our comprehensive user manual, you'll have a detailed overview of its features and functions. Download it for free from our website, and get started with this exceptional product right away.

Share
Download
background image

50 

 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide 

 

Do not disable the power cord grounding plug. The grounding 
plug is an important safety feature. 

• 

• 

• 

• 

• 

• 

Plug the power cord into a grounded (earthed) electrical outlet 
that is easily accessible at all times. 

Unplug the power cord from the power supply to disconnect 
power to the equipment. 

Do not route the power cord where it can be walked on or 
pinched by items placed against it. Pay particular attention to 
the plug, electrical outlet, and the point where the cord extends 
from the server.      

 

Powering up and configuring the server 

To power up the server, press the Power On/Standby button. 

While the server boots, RBSU and the ORCA utility are automatically 
configured to prepare the server for operating system installation.  

To configure these utilities manually: 

Press the F8 key when prompted during the array controller initialization to 
configure the array controller using ORCA. 

Press the F9 key when prompted during the boot process to change the server 
settings using RBSU. The system is set up by default for the English 
language. 

For more information on the automatic configuration, refer to the HP ROM-
Based Setup Utility User Guide located on the Documentation CD. 

 

Installing the operating system 

To operate properly, the server must have a supported operating system. For the 
latest information on supported operating systems, refer to the HP website 
(

http://www.hp.com/go/supportos

). 

Two methods are available to install an operating system on the server: 

 

Summary of Contents for ML370 - ProLiant - G3






























































































































































































































































































































Reviews:

No comments

Related manuals for ML370 - ProLiant - G3

D-Link Express Ethernetwork DI-704P Datasheet preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 2
Quick Eagle Networks 5842 Specification Sheet preview
5842
Brand: Quick Eagle Networks Pages: 4
Paradyne Hotwire 6301 Installation Instructions Manual preview
Hotwire 6301
Brand: Paradyne Pages: 20
Navisys Technology Touch Disk User Manual preview
Touch Disk
Brand: Navisys Technology Pages: 21
Quantum DXi6500 series Planning Manual preview
DXi6500 series
Brand: Quantum Pages: 20
ACE COMPUTERS PW-GT20 User Manual preview
PW-GT20
Brand: ACE COMPUTERS Pages: 32
LevelOne WBR-3402TX User Manual preview
WBR-3402TX
Brand: LevelOne Pages: 146
TRENDnet TEW-752DRU User Manual preview
TEW-752DRU
Brand: TRENDnet Pages: 68
Patton electronics IpLink 2884 Quick Start Manual preview
IpLink 2884
Brand: Patton electronics Pages: 8
TP-Link TD-8840 User Manual preview
TD-8840
Brand: TP-Link Pages: 25
Ubiquiti Amplifi AFi-LR Quick Start Manual preview
Amplifi AFi-LR
Brand: Ubiquiti Pages: 32
Atlantis Land A02-RA243-W54M Quick Start Manual preview
A02-RA243-W54M
Brand: Atlantis Land Pages: 85
morse 185R Operator'S Manual preview
185R
Brand: morse Pages: 6
Acer Altos RM900 Installation Manual preview
Altos RM900
Brand: Acer Pages: 52
Acer AB2x280 F1 Service Manual preview
AB2x280 F1
Brand: Acer Pages: 94
Acer Altos R700 Series User Manual preview
Altos R700 Series
Brand: Acer Pages: 135
Acer AC100 Specifications preview
AC100
Brand: Acer Pages: 10
Acer Altos R710 Service Manual preview
Altos R710
Brand: Acer Pages: 148

Brands by name

Popular brands

Load more brands