manualshive.com logo in svg

HP ML370 - ProLiant - G3, Reference And Troubleshooting Manual

The HP ML370 ProLiant G3 is a powerful server designed for optimal performance and reliability. With our comprehensive user manual, you'll have a detailed overview of its features and functions. Download it for free from our website, and get started with this exceptional product right away.

Share
Download
background image

 Troubleshooting 

185 

 

Invalid or incorrect command-line parameters 

If incorrect parameters are passed into command-line options, an error message 
describing the invalid or incorrect parameter is displayed and the program exits 
(Example: Invalid source path for system configuration or ROMPaq files). 
Correct the invalid parameter, and then restart the process. 

 

Access denied on target computer 

If you specify a networked target computer for which you do not have 
administrative privileges, an error message is displayed describing the problem, 
and then the program exits. Obtain administrative privileges for the target 
computer, and then restart the process. Be sure the remote registry service is 
running on a Windows®-based system. 

 

Network connection fails on remote communication 

Because network connectivity cannot be guaranteed, it is possible for the 
administrative client to become disconnected from the target server during the 
ROM flash preparation. If any remote connectivity procedure fails during the 
ROM flash online preparation, the ROM flash does not occur for the target 
system. An error message describing the broken connection displays and the 
program exits. Attempt to ascertain and correct the cause of connection failure, 
and then restart the process. 

 

Failure occurs during ROM flash 

After the online flash preparation has been successfully completed, the system 
ROM is flashed offline. The flash cannot be interrupted during this process or the 
ROM image is corrupted and the server does not start. The most likely reason for 
failure is a loss of power to the system during the flash process. Initiate ROMPaq 
disaster recovery procedures. 

 

Target system is not supported 

If the target system is not listed in the supported servers list, an error message is 
displayed and the program exits. Only supported systems can be upgraded using 
the Remote ROM Flash utility. To see if the server is supported, refer to the 
Software and Drivers Download website 
(

http://h18007.www1.hp.com/support/files/server

). 

 

Summary of Contents for ML370 - ProLiant - G3






























































































































































































































































































































Reviews:

No comments

Related manuals for ML370 - ProLiant - G3

H3C H3C S7500E-X Command Reference Manual preview
H3C S7500E-X
Brand: H3C Pages: 16
H3C SR6600 SPE-FWM Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 24
Patton electronics IpLink 2884 Getting Started Manual preview
IpLink 2884
Brand: Patton electronics Pages: 51
Vaillant VR 920 Safety & Instruction Manual preview
VR 920
Brand: Vaillant Pages: 176
ZyXEL Communications ZyXEL EES-1024AF User Manual preview
ZyXEL EES-1024AF
Brand: ZyXEL Communications Pages: 99
NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Datasheet preview
GSM7224v2 - Layer 2 Managed Gigabit Switch
Brand: NETGEAR Pages: 3
Rackable Systems S3116-NAS Getting Started Manual preview
S3116-NAS
Brand: Rackable Systems Pages: 4
Ykk ap YES 45 FI Installation Manual preview
YES 45 FI
Brand: Ykk ap Pages: 36
Deliberant APC Mach 5 V3 Quick Installation Manual preview
APC Mach 5 V3
Brand: Deliberant Pages: 16
Toto Link ND300V2 Manual preview
ND300V2
Brand: Toto Link Pages: 57
Palmako EL12-1207FSC Installation Manual preview
EL12-1207FSC
Brand: Palmako Pages: 20
HGST Ultrastar 7K2 Technical Reference Manual preview
Ultrastar 7K2
Brand: HGST Pages: 51
Stratus ftServer 2500 Site Planning Manual preview
ftServer 2500
Brand: Stratus Pages: 106
Trane 4950 0471 Installing And Configuring preview
4950 0471
Brand: Trane Pages: 8
Datacom DM4000 Series Installation And Operation Manual preview
DM4000 Series
Brand: Datacom Pages: 118
Fujitsu MAY2036RC Product/ Product/Maintenance Manual preview
MAY2036RC Product/
Brand: Fujitsu Pages: 94
Fujitsu MAX3036NC Maintenance Manual preview
MAX3036NC
Brand: Fujitsu Pages: 130
Fujitsu MBA3073FD Product Manual preview
MBA3073FD
Brand: Fujitsu Pages: 106

Brands by name

Popular brands

Load more brands