HP ML370 - ProLiant - G3, Reference And Troubleshooting Manual

Page: 199 / 317

Troubleshooting 199
Accelerator Status: Obsolete Data was Discarded
Description: During reset initialization, obsolete data was found in the cache,
and was discarded (not written to the drives).
Action: No action is required.
Accelerator Status: Obsolete Data was Flushed (Written) to Drives
Description: During reset initialization, obsolete data was found in the cache.
The obsolete data was written to the drives, but newer data may have been
overwritten.
Action: If newer data was overwritten, you may need to restore newer data;
otherwise, normal operation should continue.
Accelerator Status: Permanently Disabled
Description: Array accelerator board has been permanently disabled. It will
remain disabled until it is reinitialized using ACU.
Action: Check the Disable Code field. Run ACU to reinitialize the array
accelerator board.
Accelerator Status: Possible Data Loss in Cache
Description: Possible data loss was detected during power-up due to all batteries
being below sufficient voltage level and no presence of the identification
signatures on the array accelerator board.
Action: No way exists to determine if dirty or bad data was in the cache and is
now lost.
Accelerator Status: Temporarily Disabled
Description: Array accelerator board has been temporarily disabled.
Action: Check the Disable Code field.