manualshive.com logo in svg

HP ML370 - ProLiant - G3, Reference And Troubleshooting Manual

The HP ML370 ProLiant G3 is a powerful server designed for optimal performance and reliability. With our comprehensive user manual, you'll have a detailed overview of its features and functions. Download it for free from our website, and get started with this exceptional product right away.

Share
Download
background image

174 

 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide 

 

Slow-moving horizontal lines are displayed 

Action: Be sure magnetic field interference is not occurring. Move the monitor 
away from other monitors or power transformers. 

 

Mouse and keyboard problems 

Action: 

1.  Be sure no loose connections (on page 

154

) exist. If a KVM switching device 

is in use, be sure the server is properly connected to the switch. 

− 

For rack-mounted servers, check the cables to the switch box and be sure 
the switch is correctly set for the server. 

− 

For tower-model servers, check the cable connection from the input 
device to the server. 

2.  If a KVM switching device is in use, be sure all cables and connectors are the 

proper length and are supported by the switch. Refer to the switch 
documentation. 

3.  Be sure the current drivers for the operating system are installed. 

4.  Be sure the device driver is not corrupted by replacing the driver. 

5.  Restart the system and check whether the input device functions correctly 

after the server restarts. 

6.  Replace the device with a known working equivalent device (another similar 

mouse or keyboard). 

− 

If the problem still occurs with the new mouse or keyboard, the 
connector port on the system I/O board is defective. Replace the board. 

− 

If the problem no longer occurs, the original input device is defective. 
Replace the device. 

7.  Be sure the keyboard or mouse is connected to the correct port. Determine 

whether the keyboard lights flash at POST or the NumLock LED illuminates. 
If not, change port connections. 

8.  Be sure the keyboard or mouse is clean. 

 

 

Summary of Contents for ML370 - ProLiant - G3






























































































































































































































































































































Reviews:

No comments

Related manuals for ML370 - ProLiant - G3

D-Link DSL-504T Manual preview
DSL-504T
Brand: D-Link Pages: 99
D-Link DI-804V Datasheet preview
DI-804V
Brand: D-Link Pages: 5
D-Linke DHP-346AV Quick Installation Manual preview
DHP-346AV
Brand: D-Linke Pages: 32
IBM Enterprise Server S80 User Manual preview
Enterprise Server S80
Brand: IBM Pages: 282
F5 VIPRION 2400 Platform Manual preview
VIPRION 2400
Brand: F5 Pages: 72
F-SECURE SENSE Quick Manual preview
SENSE
Brand: F-SECURE Pages: 19
TP-Link TD-8817 Specifications preview
TD-8817
Brand: TP-Link Pages: 3
Yeong Yang Cube YY-0430 Technical Instruction preview
Cube YY-0430
Brand: Yeong Yang Pages: 7
Devolinx STE-601C User Manual preview
STE-601C
Brand: Devolinx Pages: 51
Watchguard Firebox T20-W Quick Start Manual preview
Firebox T20-W
Brand: Watchguard Pages: 40
Watchguard Firebox M470 Hardware Manual preview
Firebox M470
Brand: Watchguard Pages: 32
Draytek Vigor 2700G Specifications preview
Vigor 2700G
Brand: Draytek Pages: 2
Genie IP8ESP User Manual preview
IP8ESP
Brand: Genie Pages: 6
Stardom SA2TB3 Quick Setup Manual preview
SA2TB3
Brand: Stardom Pages: 2
IBM Power AC922 8335-GTW Handbook preview
Power AC922 8335-GTW
Brand: IBM Pages: 70
TYANO GX38-B5550 Service Engineer'S Manual preview
GX38-B5550
Brand: TYANO Pages: 68
Drobo DroboElite User Manual preview
DroboElite
Brand: Drobo Pages: 178
Supermicro SUPERSERVER 2048U-RTR4 User Manual preview
SUPERSERVER 2048U-RTR4
Brand: Supermicro Pages: 152

Brands by name

Popular brands

Load more brands