HP Integrity rx7640, Service Manual

Page: 102 / 195

HP-UX Boot Loader for IA64 Revision 1.723
Press Any Key to interrupt Autoboot
\efi\hpux\AUTO ==> boot vmunix
Seconds left till autoboot - 9
[User Types a Key to Stop the HP-UX Boot Process and Access the HPUX.EFI Loader ]
Type ’help’ for help
HPUX>
5. At the
HPUX.EFI
interface (the HP-UX Boot Loader prompt,
HPUX>
), enter the
boot -is
vmunix
command to boot HP-UX (the
/stand/vmunix
kernel) in single-user (
-is
) mode.
HPUX> boot -is vmunix
> System Memory = 4063 MB
loading section 0
................................................... (complete)
loading section 1
........ (complete)
loading symbol table
loading System Directory(boot.sys) to MFS
....
loading MFSFILES Directory(bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text: Data:3715K + BSS:3637K = Total:33306K
Console is on a Serial Device
Booting kernel...
6. Exit the console and management processor interfaces if you are finished using them.
To exit the EFI environment, press ^B ( B ); this exits the nPartition console and
returns to the management processor Main Menu. To exit the management processor, enter
X
at the Main Menu.
LVM-Maintenance Mode HP-UX Booting
This section describes how to boot HP-UX in LVM-maintenance mode on cell-based HP 9000
servers and cell-based HP Integrity servers.
• On HP 9000 servers, to boot HP-UX in LVM-maintenance mode, refer to “LVM-Maintenance
Mode HP-UX Booting (BCH Menu)” (page 102) .
• On HP Integrity servers, to boot HP-UX in LVM-maintenance mode, refer to
“LVM-Maintenance Mode HP-UX Booting (EFI Shell)” (page 103) .
Procedure 4-7 LVM-Maintenance Mode HP-UX Booting (BCH Menu)
From the BCH Menu, you can boot HP-UX in LVM-maintenance mode by issuing the
BOOT
command, stopping at the ISL interface, and issuing
hpux
loader options. The BCH Menu is
available only on HP 9000 servers.
1. Access the BCH Main Menu for the nPartition on which you want to boot HP-UX in
LVM-maintenance mode.
Log in to the management processor, and enter
CO
to access the Console list. Select the
nPartition console. When accessing the console, confirm that you are at the BCH Main Menu
(the
Main Menu: Enter command or menu>
prompt). If you are at a BCH menu other
than the Main Menu, then enter
MA
to return to the BCH Main Menu.
2. Boot the desired device by using the
BOOT
command at the BCH interface, and specify that
the nPartition stop at the ISL prompt prior to booting (reply
y
to the “stop at the ISL prompt”
question).
102 Booting and Shutting Down the Operating System