HP Integrity rx7640, Service Manual

Page: 181 / 195

Main Menu: Enter command or menu > BOOT 0/0/2/0/0.13
BCH Directed Boot Path: 0/0/2/0/0.13
Do you wish to stop at the ISL prompt prior to booting? (y/n) >> y
Initializing boot Device.
....
ISL Revision A.00.42 JUN 19, 1999
ISL>
3. From the ISL prompt, issue the appropriate Secondary System Loader (
hpux
) command to
boot the HP-UX kernel in the desired mode.
Use the
hpux
loader to specify the boot mode options and to specify which kernel to boot
on the nPartition (for example,
/stand/vmunix
).
• To boot HP-UX in single-user mode:
ISL> hpux -is boot /stand/vmunix
Example 7-1 (page 181) shows output from this command.
• To boot HP-UX at the default run level:
ISL> hpux boot /stand/vmunix
To exit the ISL prompt and return to the BCH interface, issue the
EXIT
command instead
of specifying one of the
hpux
loader commands.
Refer to the hpux(1M) manpage for a detailed list of
hpux
loader options.
Example 7-1 Single-User HP-UX Boot
ISL Revision A.00.42 JUN 19, 1999
ISL> hpux -is /stand/vmunix
Boot
: disk(0/0/2/0/0.13.0.0.0.0.0;0)/stand/vmunix
8 1 1402336 start 0x21a0e8
....
INIT: Overriding default level with level ’s’
INIT: SINGLE USER MODE
INIT: Running /sbin/sh
#
4. Exit the console and management processor interfaces if you are finished using them.
To exit the BCH environment, press
^B
(
B
); this exits the nPartition console and
returns to the management processor Main Menu. To exit the management processor, enter
X
at the Main Menu.
LVM-Maintenance Mode HP-UX Booting
This section describes how to boot HP-UX in LVM-maintenance mode on cell-based HP 9000
servers.
HP-UX for the HP Integrity rx7640 and HP 9000 rp7440 Servers 181