HP Integrity rx7640, Service Manual

Page: 65 / 195

Figure 3-19 PCI I/O Slot Details
Manual Release Latch Closed
Manual Release Latch Open
Power LED (Green)
Attention LED (Yellow)
OL* Attention Button
7. Wait for the green power LED to stop blinking.
8. Check for errors in the hotplugd daemon log file (default: /var/adm/hotplugd.log).
The critical resource analysis (CRA) performed while doing an attention button initiated
add action is very restrictive and the action will not complete–it will fail–to protect critical
resources from being impacted.
For finer control over CRA actions use pdweb or the olrad command. Refer to the Interface
Card OL* Support Guide located on the Web at http://docs.hp.com for details.
9. Replace the top cover.
10. Connect all cables to the installed PCI card.
Installing an A6869B VGA/USB PCI Card in a Server
The A6869B VGA/USB PCI card is a dual function combo card, hosting VGA and universal serial
bus (USB) controllers. Both of these devices sit behind a PCI-PCI bridge. The A6869B VGA/USB
PCI card operates at the conventional 66MHz/64 bit PCI rate and is universally keyed. All
signalling and form factors conform to the PCI Local Bus Specification 2.3. The VGA controller has
128Mbits of DDR-1 RAM for use as a frame buffer.
The A6869B VGA/USB PCI card can be installed into any slot in a PCI/PCI-X backplane.
Installing Additional Cards and Storage 65