HP Integrity rx7640, Service Manual

Page: 112 / 195

Refer to “Shutting Down Microsoft Windows” (page 113) for details on shutting down the
Windows OS.
CAUTION:
ACPI Configuration for Windows Must Be windows
On cell-based HP Integrity servers, to boot
the Windows OS, an nPartition ACPI configuration value must be set to
windows
.
At the EFI Shell, enter the
acpiconfig
command with no arguments to list the current ACPI
configuration. If the
acpiconfig
value is not set to
windows
, then Windows cannot boot. In
this situation, you must reconfigure
acpiconfig
; otherwise, booting will be interrupted with
a panic when Windows is launched.
To set the ACPI configuration for Windows: At the EFI Shell enter the
acpiconfig windows
command, and then enter the
reset
command for the nPartition to reboot with the proper
(
windows
) configuration for Windows.
NOTE:
Microsoft Windows Booting on HP Integrity Servers
The recommended method for booting
Windows is to use the EFI Boot Manager menu to choose a Windows entry from the boot options
list. Using the
ia64ldr.efi
Windows loader from the EFI Shell is not recommended.
Procedure 4-15 Windows Booting
From the EFI Boot Manager menu, select an item from the boot options list to boot Windows
using that boot option. The EFI Boot Manager is available only on HP Integrity servers.
Refer to “ACPI Configuration for Windows Must Be windows” (page 112) for required
configuration details.
1. Access the EFI Boot Manager menu for the system on which you want to boot Windows.
Log in to the management processor, and enter
CO
to access the Console list. Select the
nPartition console.
When accessing the console, confirm that you are at the EFI Boot Manager menu (the main
EFI menu). If you are at another EFI menu, select the Exit option from the submenus until
you return to the screen with the
EFI Boot Manager
heading.
2. At the EFI Boot Manager menu, select an item from the boot options list.
Each item in the boot options list references a specific boot device and provides a specific
set of boot options or arguments to be used when booting the device.
3. Press Enter to initiate booting using the chosen boot option.
4. When Windows begins loading, wait for the Special Administration Console (SAC) to become
available.
The SAC interface provides a text-based administration tool that is available from the
nPartition console. For details, refer to the SAC online help (type
?
at the
SAC>
prompt).
Loading.: Windows Server 2003, Datacenter
Starting: Windows Server 2003, Datacenter
Starting Windows...
********************************************************************************
Computer is booting, SAC started and initialized.
Use the "ch -?" command for information about using channels.
Use the "?" command for general help.
SAC>
112 Booting and Shutting Down the Operating System