HP Integrity rx7640, Service Manual

Page: 19 / 195

1 HP Integrity rx7640 Server and HP 9000 rp7440 Server
Overview
The HP Integrity rx7640 and HP 9000 rp7440 Servers are members of HP’s business-critical
computing platform family in the mid-range product line.
The information in chapters one through six of this guide applies to the HP Integrity rx7640 and
HP 9000 rp7440 Servers, except for a few items specifically denoted as applying only to the HP
Integrity rx7640 Server. Chapter seven covers any information specific to the HP 9000 rp7440
Server only.
IMPORTANT: Ensure a valid UUID is either in place or available prior to maintenance of these
servers. This step is vital when performing upgrades and is recommended for existing hardware
service restoration. Specific information for upgrades is found in the Upgrade Guide, Mid-Range
Two-Cell HP Servers to HP Integrity rx7640 Server, located at the following
URL:
http://docs.fc.hp.com .
The server is a 10U
1
high, 8-socket symmetric multiprocessor (SMP) rack-mount or standalone
server. Features of the server include:
• Up to 256 GB of physical memory provided by dual inline memory modules (DIMMs).
• Dual-core processors.
• Up to 16 processors with a maximum of 4 processor modules per cell board and a maximum
of 2 cell boards.
• One cell controller (CC) per cell board.
• Turbo fans to cool CPUs and CCs on the cell boards.
• Up to four embedded hard disk drives.
• One half-height DVD drive, two slimline DVDs or one DAT drive.
• Two front chassis mounted N+1 fans.
• Two rear chassis mounted N+1 fans.
• Six N+1 PCI-X card cage fans.
• Two N+1 bulk power supplies.
• N+1 hot-swappable system oscillators.
• Sixteen PCI slots divided into two IO Chassis each. Each IO Chassis accommodates eight
slots supporting PCI/PCI-X/PCI-X 2.0 device adapters or four PCI/PCI-X/PCI-X 2.0 and four
PCIe device adapters.
• Up to two core I/O card sets.
• One manageability processor per core I/O card with failover capability when two or more
core I/O cards are installed and properly configured.
• Four 220 V AC power plugs. Two are required and the other two provide power source
redundancy.
Detailed Server Description
The following section provides detailed information about the server components.
1. The U is a unit of measurement specifying product height. One U is equal to 1.75 inches.
Detailed Server Description 19