HP Integrity rx7640, Service Manual

Page: 149 / 195

Figure 6-8 Front Panel Board Detail
Replacing the Front Panel Board
1. Slide the front panel into its slot from inside the server.
2. Insert the left side of the board into the slot first; the right side of the board is angled toward
the rear of the chassis. Insert the right side of the board.
Ensure that the power switch does not get caught in one of the many holes in the front of
the chassis. Push the panel forward until the lock tabs click.
3. Attach the front panel bezel. Align the light pipes with the slots in the chassis and push
toward the rear of the chassis, then press the tab in the center of the bezel to snap it into
place.
4. Tighten the two screws to secure the fron panel bezel to the chassis.
5. Replace the common tray cage cover.
6. Tighten the captive fastener on the common tray cage cover.
7. Attach the front panel cable to the system backplane.
8. Attach the DVD power cable.
9. Attach the SCSI cables to the MSBP.
10. Replace the front bezel and the top and left side covers.
11. Follow proper procedures to power on the server.
Removing and Replacing PCA Front Panel Board 149