HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual

Page: 228 / 300

Troubleshooting
228 HA-Fabric Manager User Guide
Windows service does not
display correctly in the
Computer Management
(Windows 2000) or Service
Control Manager (Windows
NT) window.
If you installed or uninstalled the Win32 service
while the Computer Management or Service
Control Manager window was open, the service
does not display. Close the window and re-open it
to see the changes.
An error displayed stating
that the application failed to
setup the
serverinit.txt
or
.license
file.
Delete the
<Install_Home>\Server\serverinit.txt
file
or the
<Install_Home>\Server\Config\Other\
.license
file and rerun the installer.
The product does not install
on a Windows system.
Verify that the system has 100 MB available on the
C drive. The program requires 100 MB for
installation, but only 50 MB to run.
Mapping a loop to a hub
causes the loop group and
the outermost portion of the
topology's background
group color or layout format
to revert to the default.
Make the background and/or layout changes after
mapping the loop to the hub.
The hyperlinks in a report
are broken.
Hyperlinks in reports are only active as long as the
source data is available.
When the client application
is started on an HP-UX
machine, the exception
“java.lang.OutOfMemoryEr
ror: unable to create new
native thread” displays in
thread “main.”
The following two HP-UX 11.0 kernel parameters
are set too low for most
Java
applications. Usually
you see this problem as a Java Out of Memory
error. To resolve the issue, edit the parameter limits
as mentioned below.
max_thread_proc
The maximum number of threads allowed in each
process. The minimum value (and default) is 64,
often too low for most
Java
applications. Set the
value of the max_thread_proc higher (for example,
1024) than the expected maximum number of
simultaneously active threads. The maximum value
is the value of nkthread.
nkthread
The total number of kernel threads available in the
system. This parameter is similar to the nproc
tunable except that it defines the limit for the total
number of kernel threads able to run simultaneously
in the system. The value must be greater than
nproc. The default is approximately twice that of
nproc. The maximum is 30000.
Table 19: Miscellaneous Problems and Resolutions (Continued)
Problem Resolution