manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual

The HP 316095-B21 - StorageWorks Edge Switch 2/24 is a high-performance storage switch designed to optimize data transfer and connectivity. Seamlessly integrate multiple devices with its 24 ports. To assist users in maximizing its capabilities, a comprehensive User Manual is available for free download at manualshive.com.

Share
Download
background image

Setting Up the Application

44

HA-Fabric Manager User Guide

Configuring an Appliance

If you are using a new HAFM appliance with HAFM 08.02.00 installed, follow 
the instructions in the HA-Fabric Manager Appliance Installation Guide to install 
your HAFM appliance. If you are upgrading the HAFM application on an existing 
HAFM appliance, follow the instructions in “

Upgrading the HAFM Application

” 

on page 47.

The application is comprised of two parts: the server (which runs only on the 
HAFM appliance) and the client. The server is installed on one HAFM appliance 
and stores SAN-related information; it does not have a user interface. To view 
SAN information through a user interface, you must log in to the server running 
on the appliance through a client.

Note:  

The server and client(s) may reside on the same machine, or on separate 

machines.

In some cases, a network may utilize virtual private network (VPN) or firewall 
technology, which can prohibit communication between the server application 
running on HAFM appliances and clients. In other words, a client can find a 
server, appear to log in, but immediately is logged out because the server cannot 
reach the client. To resolve this issue, the application automatically detects the 
network configuration and runs the client in “polling mode” when necessary.

When the client is not running in polling mode, the server calls the client 
whenever it has new data. When the client is running in polling mode, the server 
queues up the data and the client periodically checks in (approximately every 5 or 
10 seconds) and gets the data.

Configuring a New HAFM Appliance

In order to activate the application, you need to request a license key. Once you 
have activated the application, go to “

Accessing HAFM

” on page 47 for further 

instructions.

Getting a License Key for New Software

If you just purchased the application, use these instructions to obtain your license 
key:

1. Go to the URL listed on the software entitlement request certificate for 

HAFM and click generate a license key.

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24













































































































































































































































































































Reviews:

No comments

Related manuals for 316095-B21 - StorageWorks Edge Switch 2/24

Oki ML8810 Installation Instructions preview
ML8810
Brand: Oki Pages: 4
IBM NetVista N2800e Reference Manual preview
NetVista N2800e
Brand: IBM Pages: 82
IBM x3655 - System - 7985 User Manual preview
x3655 - System - 7985
Brand: IBM Pages: 118
Atop MB5202 Series Hardware Installation Manual preview
MB5202 Series
Brand: Atop Pages: 2
IBM 87302RU Planning And Installation Manual preview
87302RU
Brand: IBM Pages: 140
Supero SUPERSERVER 6027R-TRF User Manual preview
SUPERSERVER 6027R-TRF
Brand: Supero Pages: 102
Digital Equipment Prioris Series Manual preview
Prioris Series
Brand: Digital Equipment Pages: 15
Obvius AcquiLite EMB A7810 Installation And Operation Manual preview
AcquiLite EMB A7810
Brand: Obvius Pages: 29
Infotrend EonServ 7000 Series Quick Installation Manual preview
EonServ 7000 Series
Brand: Infotrend Pages: 2
Fujitsu GP 7000F Manual preview
GP 7000F
Brand: Fujitsu Pages: 200
HP ProLiant DL185 Quickspecs preview
ProLiant DL185
Brand: HP Pages: 38
HP ProLiant DL320 Generation 4 Maintenance And Service Manual preview
ProLiant DL320 Generation 4
Brand: HP Pages: 70
HP ProLiant DL288 GENERATION 6 User Manual preview
ProLiant DL288 GENERATION 6
Brand: HP Pages: 45
HP ProLiant DL360e Gen8 User Manual preview
ProLiant DL360e Gen8
Brand: HP Pages: 116
HP ProLiant DL20 Generation9 Overview preview
ProLiant DL20 Generation9
Brand: HP Pages: 48
HP ProLiant DL165 Quickspecs preview
ProLiant DL165
Brand: HP Pages: 38
HP ProLiant DL2000 Specification preview
ProLiant DL2000
Brand: HP Pages: 46
HP ProLiant DL360 Generation 5 Quickspecs preview
ProLiant DL360 Generation 5
Brand: HP Pages: 43

Brands by name

Popular brands

Load more brands