manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual

The HP 316095-B21 - StorageWorks Edge Switch 2/24 is a high-performance storage switch designed to optimize data transfer and connectivity. Seamlessly integrate multiple devices with its 24 ports. To assist users in maximizing its capabilities, a comprehensive User Manual is available for free download at manualshive.com.

Share
Download
background image

Optional Features

160

HA-Fabric Manager User Guide

Enterprise Fabric Mode

Enterprise Fabric Mode is an option available on the Fabrics menu in the 
HAFM application if the SANtegrity feature key is installed. This option 
automatically enables the following features and operating parameters that are 
necessary in multiswitch Enterprise Fabric environments. Note that there are 
specific requirements for disabling these parameters and features when the 
director or switch is offline or online. 

Fabric Binding

This is a SANtegrity feature enabled through the Fabrics menu in HAFM that 
allows or prohibits switches and directors from merging with a selected fabric. 
See “

Enable/Disable and Online State Functions

” on page 154 for details on 

enabling/disabling Fabric Binding with Enterprise Fabric Mode.

Switch Binding

This is a SANtegrity feature enabled through the Configure menu in the Element 
Manager that allows or prohibits switches and/or directors from connecting to 
switch E_Ports or F_Ports. See “

Enable/Disable and Online State Functions

” on 

page 154 for details on enabling/disabling Switch Binding with Enterprise Fabric 
Mode enabled.

Rerouting Delay

Rerouting Delay is a parameter in the Configure Switch Parameters dialog box, 
available from the Configure menu in the Element Manager application. 
Rerouting Delay ensures that frames are delivered through the fabric in order to 
their destination.

If there is a change to the fabric topology that creates a new path (for example, a 
new switch is added to the fabric), frames may be routed over this new path if the 
path’s hop count is less than a previous path with a minimum hop count. This 
rerouting may result in frames being delivered to a destination out of order since 
frames sent over the new, shorter path may arrive ahead of older frames still in 
route over the older path. If Rerouting Delay is enabled, traffic ceases in the fabric 
for the time specified in the E_D_TOV field of the Configure Fabric Parameters 
dialog box (Configure menu). This delay enables frames sent on the old path to 
exit to their destination before new frames begin traversing the new path.

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24













































































































































































































































































































Reviews:

No comments

Related manuals for 316095-B21 - StorageWorks Edge Switch 2/24

Acano Solution Installation Manual preview
Solution
Brand: Acano Pages: 17
Quatech AirborneDirect ABDG-SE-IN5410 Quick Start Manual preview
AirborneDirect ABDG-SE-IN5410
Brand: Quatech Pages: 8
Leightronix UltraNEXUS-HD X5 Product Quick Manual preview
UltraNEXUS-HD X5
Brand: Leightronix Pages: 5
Quanta Computer STRATOS S400-X44E Technical Manual preview
STRATOS S400-X44E
Brand: Quanta Computer Pages: 251
MRV Communications LX-4000 Series Getting Started preview
LX-4000 Series
Brand: MRV Communications Pages: 65
LaCie 301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard... User Manual preview
301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard...
Brand: LaCie Pages: 74
Acer Altos RM900 Installation Manual preview
Altos RM900
Brand: Acer Pages: 52
Acer AB2x280 F1 Service Manual preview
AB2x280 F1
Brand: Acer Pages: 94
Acer Altos R700 Series User Manual preview
Altos R700 Series
Brand: Acer Pages: 135
Acer AC100 Specifications preview
AC100
Brand: Acer Pages: 10
Acer Altos R710 Service Manual preview
Altos R710
Brand: Acer Pages: 148
Acer Altos G300 User Manual preview
Altos G300
Brand: Acer Pages: 108
Acer Altos 350 User Manual preview
Altos 350
Brand: Acer Pages: 118
Acer Altos S300 User Manual preview
Altos S300
Brand: Acer Pages: 78
Acer Altos G700 series User Manual preview
Altos G700 series
Brand: Acer Pages: 126
Acer Altos S700 Series User Manual preview
Altos S700 Series
Brand: Acer Pages: 124
Acer Altos 1200LP User Manual preview
Altos 1200LP
Brand: Acer Pages: 126
Acer Altos G320 Series User Manual preview
Altos G320 Series
Brand: Acer Pages: 132

Brands by name

Popular brands

Load more brands