HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual

Page: 51 / 300

Setting Up the Application
51 HA-Fabric Manager User Guide
Figure 16: View All - HAFM window
Accessing Remote HAFM appliances
You can use the HAFM Client applications to remotely access an HAFM
appliance. You must have the HAFM Client application installed on your
computer before proceeding. See instructions for HAFM Client application
installation in “
Configuring Remote Workstations ” on page 251.
To access remote HAFM appliances, perform the following:
1. Start the HAFM Client application by following the instructions in “ Starting
HAFM on Remote Workstations ” on page 55.
2. Enter the appliance’s network address in the HAFM 8 Log In dialog box, as
shown in Figure 15 .
3. Enter the HAFM appliance IP address in the Network Address field.
The default address that displays in the Network Address field is the address
of the last appliance accessed. Click the Network Address drop down list to
see the network addresses of all HAFM appliances that were accessed from
the computer you are logged in to.