HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual, Page: 154 / 300

Optional Features
154 HA-Fabric Manager User Guide
SANtegrity Features
SANtegrity includes a set of features that enhance security in Storage Area
Networks (SANs) that contain a large and mixed group of fabrics and attached
devices. Through these features you can allow or prohibit switch attachment to
fabrics and device attachment to switches. These features are enabled by
purchasing a feature key, then enabling the key through the Configure Feature
Key dialog box.
SANtegrity Binding features include:
■
Fabric Binding
■
Switch Binding
Enterprise Fabric Mode—Although this is not a keyed feature, the SANtegrity
Fabric Binding and Switch Binding must be installed before you can use the
Enterprise Fabric Mode function through the HAFM Fabrics menu.
Fabric Binding
This feature is managed through the Fabric Binding option, available through the
Fabrics menu in HAFM when the Fabrics tab is selected. Using Fabric Binding,
you can allow specific switches to attach to specific fabrics in the SAN. This
provides security from accidental fabric merges and potential fabric disruption
when fabrics become segmented because they cannot merge.
Enable/Disable and Online State Functions
In order for Fabric Binding to function, specific operating parameters and optional
features must be enabled. Also, there are specific requirements for disabling these
parameters and features when the director or switch is offline or online. Be aware
of the following:
■
Because switches are bound to a fabric by World Wide Name (WWN) and
domain ID, the Insistent Domain ID option in the Configure Switch
Parameters dialog box is automatically enabled if Fabric Binding is enabled.
■
If Fabric Binding is enabled and the switch is online, you cannot disable
Insistent Domain ID.
■
If Fabric Binding is enabled and the director or switch is offline, you can
disable Insistent Domain ID, but this disables Fabric Binding.