manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual, Page: 236 / 300

Share
Download
HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual Download Page 236

Information and Error Messages

236

Error Messages

Default zoning is not 

supported in Open 

Fabric Mode.

A default zone cannot 

be enabled when the 

product is enabled for 

Open Fabric mode. 

Open Fabric mode 

does not support zone 

members defined by 

port numbers.

Change the Interop Mode from 

Open Fabric to Homogeneous 

using the Configure Fabric 

Parameters dialog box. You 

can also redefine zone 

members by the device WWN.

Device is not a 

member of a zone in 

the active zone set.

The selected device is 

not a member of a 

zone in the active zone 

set and therefore 

cannot communicate 

with the other devices 

in the route.

Enable the default zone or 

activate a zone set containing 

the member before attempting 

to show the route. 

Download complete. 

Click OK and start the 

HAFM.

Download of HAFM 

and the Element 

Manager is complete.

Start the 

HAFM

 application to 

continue.

Duplicate community 

names require 

identical write 

authorizations.

If configuring two 

communities with 

identical names, they 

must also have 

identical write 

authorizations.

Verify that both communities 

with the same name have the 

same write authorizations.

Duplicate Fabric 

Name.

The specified fabric 

name already exists.

Choose another name for the 

fabric.

Duplicate name in 

zoning configuration. 

All zone and zone set 

names must be unique.

Every name in the 

zoning library must be 

unique.

Modify (to make it unique) or 

delete the duplicate name.

Duplicate nickname in 

nickname 

configuration.

Duplicate nicknames 

cannot be configured.

Modify the selected nickname 

to make it unique.

Duplicate World Wide 

Name in nickname 

configuration.

A World Wide Name 

can be associated with 

only one nickname.

Modify (to make it unique) or 

delete the selected World Wide 

Name.

Duplicate zone in zone 

set configuration.

More than one 

instance of a zone is 

defined in a zone set.

Delete one of the duplicate 

zones from the zone set.

Table 21:  HAFM Messages (Continued)

Message 

Description

Action

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24













































































































































































































































































































Reviews:

No comments