HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual Download Page 70

Page: 70 / 300

Setting Up the Application

HA-Fabric Manager User Guide

Figure 25: Discover Setup dialog box

2. Specify the IP addresses you want to discover through out-of-band discovery.

You can add, change, and remove IP addresses as necessary. See
“

Configuring IP Addresses and Community Strings

” on page 70 for

instructions.

Note:

To correctly discover all SAN products, you must specify each product’s IP

address in the Discover Setup dialog box’s Out-of-Band tab. If you do not configure

the application to discover the devices directly, the connections and attached devices

may not display correctly.

3. Select IP addresses from the Available Addresses table and add them to the

Selected Individual Addresses table by clicking the

buttons.

4. Click OK.

5. Turn discovery on or off by choosing Discover > On or Discover > Off.

Configuring IP Addresses and Community Strings

You can configure IP addresses and community strings through which the
application can perform discovery and communication functions.

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24













































































































































































































































































































Search results

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24

Reviews:

HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual, Page: 70 / 300

Search results

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24

Reviews: