HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual Download Page 92

Page: 92 / 300

Setting Up the Application

HA-Fabric Manager User Guide

2. Choose the type of file you want to import from the Import From list.

3. Enter the path and file name in the File Name field.

Note:

The default path is:

<Install_Home>\ClientData\san<date>\san*.zip

. Be sure

to select the san*.zip file for import. Importing the rep*.zip file causes errors.

4. Click OK. A message displays, stating that imported data replaced

corresponding data on the appliance.

5. If you are sure you want to replace the data on the appliance, click OK. If you

are importing a SAN file or a properties file, the client is logged out and the
HAFM 8 Log In dialog box displays. Log back into the application.

Note:

When discovery is on, the discovered SAN is replaced with the imported data.

Only one SAN can be viewed at a time. For instructions about turning on discovery,

see “

Setting Up Discovery

” on page 69.

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24













































































































































































































































































































Search results

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24

Reviews:

HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual, Page: 92 / 300

Search results

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24

Reviews: