manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual

The HP 316095-B21 - StorageWorks Edge Switch 2/24 is a high-performance storage switch designed to optimize data transfer and connectivity. Seamlessly integrate multiple devices with its 24 ports. To assist users in maximizing its capabilities, a comprehensive User Manual is available for free download at manualshive.com.

Share
Download
background image

Optional Features

149

HA-Fabric Manager User Guide

FICON Management Server

The FICON Management Server is a keyed feature that allows host control and 
inband management of the director or switch through an IBM System/390

 

or 

zSeries 900 Parallel Enterprise Server server attached to a director or switch port. 
The server communicates with the switch or director through a FICON channel. 
Control of connectivity and statistical product monitoring are provided through a 
host-attached console.

Installation

To install and enable this option, choose the Configure Feature Key option on 
the Element Manager Configure menu. 

Configuring the FICON Management Server

Use this procedure to configure whether the host is the controlling manager.

The optional FICON Management Server feature must be installed in order to 
perform this procedure.

■

Enable Management Server—Click this check box to add a check mark and 
enable the management server. Click the check mark to remove it and disable 
this feature.

■

Switch Clock Alert Mode—Click this check box to display a check mark 
and enable clock alert mode. If this is enabled, the following occurs when 
users set the date and time through the Configure Date and Time dialog box 
(Configure menu):

— If you enable Periodic Date/Time Synchronization, an error message 

displays indicating that Clock Alert Mode must be cleared to enable 
automatic synchronization of the date and time.

— If you manually set the date and time (Periodic Date/Time 

Synchronization is not enabled), a confirmation dialog box displays. 
You must click OK on that dialog box to continue manual configuration.

■

Host Control Prohibited—Click this check box to display a check mark and 
prohibit a host management program from changing configuration and 
connectivity parameters on the switch. In this case, the host program has read 
authorization only and cannot make changes. When the check mark is not 
displayed, a host program can change configuration and connectivity 
parameters on the switch.

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24













































































































































































































































































































Reviews:

No comments

Related manuals for 316095-B21 - StorageWorks Edge Switch 2/24

Cabletron Systems MicroMMAC 22ES Installation Manual preview
MicroMMAC 22ES
Brand: Cabletron Systems Pages: 93
Cable-Tronix CT-HDIPSS Installation & Configuration Manual preview
CT-HDIPSS
Brand: Cable-Tronix Pages: 33
Ablecom CE-HE130S4 Series User Manual preview
CE-HE130S4 Series
Brand: Ablecom Pages: 43
SIERRA VIDEO SYSTEMS Crestron 908012 User Manual preview
Crestron 908012
Brand: SIERRA VIDEO SYSTEMS Pages: 32
IBM 8678 Installation And User Manual preview
8678
Brand: IBM Pages: 96
Motorola AirDefence Installation Manual preview
AirDefence
Brand: Motorola Pages: 40
Motorola MVMS User Manual preview
MVMS
Brand: Motorola Pages: 90
Polycom KIRK 500 User Manual preview
KIRK 500
Brand: Polycom Pages: 34
Multitech MultiAccess MULTIACCESS MA30120 User Manual preview
MultiAccess MULTIACCESS MA30120
Brand: Multitech Pages: 179
SAFARI RM-126X Installation Manual preview
RM-126X
Brand: SAFARI Pages: 28
3Com EtherLink Quick Start Manual preview
EtherLink
Brand: 3Com Pages: 65
Intel SE7221BK1-E - Server Board - Mainboard Technical Manual preview
SE7221BK1-E - Server Board - Mainboard
Brand: Intel Pages: 105
Intel S875WP1 - EATX MBD 875 P4 DDR-2CH SATA RAID VID GETH Product Manual preview
S875WP1 - EATX MBD 875 P4 DDR-2CH SATA RAID VID GETH
Brand: Intel Pages: 112
TROY Group TROY500 Series Installation And User Manual preview
TROY500 Series
Brand: TROY Group Pages: 35
Lantronix MatchPort AR Integration Manual preview
MatchPort AR
Brand: Lantronix Pages: 30
Dell EMC PowerStore Series Hardware Information Manual preview
PowerStore Series
Brand: Dell EMC Pages: 22
ZeeVee ZyPer User Manual preview
ZyPer
Brand: ZeeVee Pages: 73
dallmeier PVS IV Installation And Configuration Manual preview
PVS IV
Brand: dallmeier Pages: 21

Brands by name

Popular brands

Load more brands