HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual Download Page 200

Page: 200 / 300

Configuring Zoning

200

HA-Fabric Manager User Guide

Figure 105: Deactivate Zone Set dialog box

5. The Deactivate Zone Set dialog box displays the names of the current active

zone set and lists the new active zone set as “<none>.” Verify the information
in this dialog box before clicking OK.

Note:

Be sure to verify the default zone set setting if you want to fully disable zoning.

If the default zone is enabled and the active zone set is deactivated, members of the

zone may still be able to communicate with each other.

6. Click OK. The active zone set and all related zones are deactivated.

7. Click OK.

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24













































































































































































































































































































Search results

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24

Reviews:

HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual, Page: 200 / 300

Search results

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24

Reviews: