manualshive.com logo in svg

HP 316095-B21 - StorageWorks Edge Switch 2/24, User Manual

The HP 316095-B21 - StorageWorks Edge Switch 2/24 is a high-performance storage switch designed to optimize data transfer and connectivity. Seamlessly integrate multiple devices with its 24 ports. To assist users in maximizing its capabilities, a comprehensive User Manual is available for free download at manualshive.com.

Share
Download
background image

Configuring SAN Products and Fabrics

103

HA-Fabric Manager User Guide

Configuring Enterprise Fabric Mode

The Enterprise Fabric Mode option is available on the Configure menu. This 
option automatically enables features and operating parameters that are necessary 
in multiswitch Enterprise Fabric environments. When Enterprise Fabric Mode is 
enabled, each switch in the fabric automatically enforces a number of 
security-related features including Fabric Binding, Switch Binding, Insistent 
Domain IDs, Domain Register for State Change Notifications (RSCNs), and 
Rerouting Delays.

About Enterprise Fabric Mode

Activating Enterprise Fabric Mode enables the following:

■

Fabric Binding—Allows or prohibits switches from merging with a selected 
fabric.

■

Switch Binding—This feature, enabled through a product’s Element 
Manager, allows or prohibits switches from connecting to switch E_Ports and 
products from connecting to F_Ports.

■

Rerouting Delay—This feature, enabled through a product’s Element 
Manager, ensures that frames are delivered through the fabric in order to their 
destination. If there is a change to the fabric topology that creates a new path 
(for example, a new switch is added to the fabric), frames may be routed over 
this new path if its hop count is less than a previous path with a minimum hop 
count. This may result in frames being delivered to a destination out of order 
since frames sent over the new, shorter path may arrive ahead of older frames 
still in route over the older path.

■

Domain RSCNs—This feature, enabled through a product’s Element 
Manager, indicates that an event occurred to a switch in a fabric. The only 
cause would be a switch entering or leaving the fabric. Notifications are sent 
fabric-wide and are not constrained by a zone set. Domain RSCNs are not sent 
between end-products.

■

Insistent Domain ID—This feature, enabled through a product’s Element 
Manager, sets the domain ID as the active domain identification when the 
fabric initializes. If Insistent Domain ID is enabled, the switch isolates itself 
from the fabric if the preferred Domain ID is not assigned as the switch’s 
Domain ID.

Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24













































































































































































































































































































Reviews:

No comments

Related manuals for 316095-B21 - StorageWorks Edge Switch 2/24

IBM eServer BladeCenter HS20Type 8832 Maintenance And Troubleshooting Manual preview
eServer BladeCenter HS20Type 8832
Brand: IBM Pages: 158
Ganz ZN-S1000VNE Quick Installation Manual preview
ZN-S1000VNE
Brand: Ganz Pages: 5
IBM 9131-52A Quick Start Manual preview
9131-52A
Brand: IBM Pages: 16
Atos BullSequana Edge nano User Manual preview
BullSequana Edge nano
Brand: Atos Pages: 29
Olive O3HD Quick Start Manual preview
O3HD
Brand: Olive Pages: 103
MSI WindBOX Series User Manual preview
WindBOX Series
Brand: MSI Pages: 18
MO-SYS VP Pro XR Manual preview
VP Pro XR
Brand: MO-SYS Pages: 26
Lava Lava DATATAP-IP Specifications preview
Lava DATATAP-IP
Brand: Lava Pages: 2
DataOn Storage CiB-9224 V12 Technical Manual preview
CiB-9224 V12
Brand: DataOn Storage Pages: 36
Philips System4 Seriver Installation Instructions Manual preview
System4 Seriver
Brand: Philips Pages: 48
Supero 6047R User Manual preview
6047R
Brand: Supero Pages: 112
Symantec FileStore N8300 Product Description Manual preview
FileStore N8300
Brand: Symantec Pages: 55
ClearCube CD9424 Quick Start Manual preview
CD9424
Brand: ClearCube Pages: 2
DM&P Group eBOX-3800 EmbedBox User Manual preview
eBOX-3800 EmbedBox
Brand: DM&P Group Pages: 28
Supermicro SuperWorkstation 5049A-TR User Manual preview
SuperWorkstation 5049A-TR
Brand: Supermicro Pages: 189
Supermicro SuperStorageServer SSG-6119P-ACR12N4L User Manual preview
SuperStorageServer SSG-6119P-ACR12N4L
Brand: Supermicro Pages: 211
Abekas Mira User'S Operation Manual preview
Mira
Brand: Abekas Pages: 382
Godex GodexLAN Operation Manual preview
GodexLAN
Brand: Godex Pages: 31

Brands by name

Popular brands

Load more brands