Hospira LifeCare XL Series, Technical & Service Manual

Page: 131 / 278

SECTION 9 DRAWINGS
430-00587-008 (Rev. 2/05) 9 - 4 Plum XL Series
46 Roller, Handle Section 7.2.9.4
47 Holder, Handle Spring Section 7.2.9.4
48 Spring, Torsion Section 7.2.9.4
49 Retainer, Door Pivot Section 7.2.9.3
50 Retainer, Snap, Knob Section 7.2.7.3
51 Magnet Section 7.2.7.3
52 Spring, Door Clip, Left-Side Section 7.2.9.3
53 Foot, Rubber Section 7.2.3
54 Gasket, Lockout Section 7.2.8.12
55 Gasket, Audible Section 7.2.8.12
56 Housing, Seal, AC Receptacle Section 7.2.8.7
57 Gasket, AC Receptacle Section 7.2.8.7
58 Bracket, AC Receptacle Section 7.2.8.7
59 Gasket, DataPort Section 7.2.8.9
60 Bracket, DataPort Section 7.2.8.9
61 Post, Equipotential Section 7.2.8.6 ,
Section 7.2.8.7
62 Bumper, XL MCU Section 7.2.7.1
63 Screw, 6-32 x 1/2, Hex Head, Slotted, with Washer As Applicable
64 Screw, 10-32 x 1/2, Hex Head, Slotted, with Washer As Applicable
65 Screw, 6-32 x 5/16, Hex Head, Slotted, with Washer As Applicable
66 Screw, 4-24 x 3/8, B/Point, Phillips As Applicable
67 Screw, 6-32 x 3/4, Hex Head, Slotted, with Washer As Applicable
68 Screw, 6-32 x 3/8, Slotted, Type T As Applicable
69 Screw, 6-32 x 1, Hex Head, Slotted, with Washer As Applicable
70 Kit, Screw, Lock, 4-40 x .312 As Applicable
71 Kit, Screw, Lock, 4-40 As Applicable
72 Nut, KEP, 6-32 As Applicable
73 Nut, Hex, Metric, DIN 934, 6mm As Applicable
74 Nut, Hex, Metric, DIN 439, 6mm As Applicable
75 Nut, Hex, Self-Locking, 4-40 As Applicable
Table 9-2. IPB for the Infusion System
Index No. Nomenclature
Replacement
Procedure