Horizon Hobby ??11, Operation Manual

Page: 52 / 124

50
▋
Aileron▋to▋Flap▋Mixing▋【AILE → FLAP▋MIX】
▋ ▋ Function▋Explanation
This function mixes the aileron operation to the Flaps. This allows maneuvering using only
Aileron to minimize the generation of air resistance when you wish to speed up the roll rate.
▋
▋
Setting▋Method
In order to activate this function, it is necessary to set “DUAL FLAP” under ”WING TYPE” on the System List.
The mixing amount from Aileron to Flap can be set separately for both the left and right. It is possible to allocate
a switch to the desired position, or use the flight mode switch to control this mix.
It is also possible to change the mix setting using the throttle stick. Any Aileron Trim can also be included in the
mix..
⿟ Coupled function with Throttle stick (THRO STK)
It is possible to set two different settings on the Throttle stick at the desired point of change. Initially this is set to
“INH” – activate as necessary.
⿟ Include Aileron Trim Function (INCLUDE AILE TRIM)
This function can include the Aileron trim with Aileron to Flap Mixing. The initial setting is “INH” – activate as
necessary.
▋
▋
Caution▋Note
⿟ Actually operate the servos and carefully confirm the settings before flying.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Mixing amount
Include Aileron Trim Function (INCLUDE AILE TRIM) Throttle stick coupling function (THRO STK)
XG11.indd 50 12/01/19 12:30