Horizon Hobby ??11, Operation Manual

Page: 64 / 124

62
▋
Program▋Mixing【PROGRAM▋MIX▋1-6】
▋ ▋ Function▋Explanation
If a mixing function is required that is not already incorporated in the transmitter, six program
mixing systems are provided for use. These can be used to freely structure your own mixes. For
this mixing, either simple normal mixing or curve mixing that allows setting of a curve using
multiple points can be selected.
▋
▋
Setting▋Method
⿟ Normal mixing and Curve mixing
With Helicopter models, there is only one (1) available mixer which can be activated by switch or by flight mode.
On Airplane and Glider models, there are two (2) mixers available that can be activated by switch or by flight
mode.
፧ Selection of the Master Channel and Function of Master Include
Select the Master Channel for inputting the program mix. The channel name may be different depending on
the type selection (please refer to chart 1 below).
There is an option available to include or not include any trim or other mixing to the program mixing in
regards to the Master channel.
፧ Slave channel Selection
Select the Channel for outputting the mix. The channel name may be different from the default depending
on the type selection (please refer to chart 2 below).
There is an option available to include or not include any other mixing with the program mix in regards to
the Slave channel.
፧ Throttle stick (Coupling function) (THRO STK) Only for Airplane
It is possible to switch between two desired positions using the throttle stick. Initially this is set to INH.
Activate the function as necessary.
⿟ Normal Mixing
By default, this is set to “INH”. Select Normal for using this Program Mixing. To “INH” this function, move the
cursor to the Master/Slave channel selection, then press the CLR key.
፧ Mixing Reference Point Offset (OFFSET)
By setting an OFFSET, the mixing Reference Point can be changed to the desired Mixing point on the Master
Channel.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Slave channel Current position Master channel
Switch Selection Throttle stick
coupling function
Mixing Offset on
reference point
Mixing value
Slave channel Current position Master channel
Switch Selection Throttle stick
coupling function
Mixing Offset on
reference point
Mixing value
XG11.indd 62 12/01/19 12:30