Horizon Hobby ??11, Operation Manual

Page: 93 / 124

91
② When adding "SPEED/LAUNCH" as a custom flight mode
It is possible to set a custom switch for choosing the Flight Mod when ‘Speed/Launch’ is selected. It is also
possible to select the priority for each flight mode. Select the switch position using the "SW SEL" function then
choose the priority for each flight mode.
⿟ Device Select (DEVICE)
Here input devices (switches, levers and trim switches) can be linked to a particular channel. Select the device as
desired.
⿟ Selection of output (OUT)
Here the Output configuration of each channel can be specified.
INH: No output.
ACT: Allow output - standard.
MOT: Use this channel for Motor control.
※ The channels which can be allocatable for Motor control are “GEAR”（Gear Channel）and “AUX3”（AUX 3 channel）
When the Motor Channel is set, “MOTOR SYSTEM” on the function List becomes activated.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
⿟ Even though a channel’s OUT (Output) can be set to “INH”, it is possible to use the channel with a “PROGRAM
MIX” (on the function List) as a Master channel. It is also possible to set this under “DEVICE SELECT”
⿟ Touch Select function: When selecting a switch, by operating the switch that you wish to use, the switch will be
automatically recognize and be set to that function. It is useful when you are not sure of the switch name.
⿟ It is possible to select from the following three (3) movement options when using a trim lever as an Input device.
2P: 2position movement
3P: 3position movement
MO: Momentary Movement
▋ ▋ Caution▋Note
Actually operate the servos and carefully confirm the settings before flying.
Flight Mode Extension switch
Flight Mode Switch
Device Select
Selection of output Selection of output
Speed Switch
Selection of output Selection of output
Launch Switch
Launch Reverce Switch
Flight Mode Switch
Device Select
Selection of output Selection of output
Device Select
System▋List▋
XG11.indd 91 12/01/19 12:30