Horizon Hobby ??11, Operation Manual

Page: 46 / 124

44
▋
Flight▋Mode▋Delay【FLIGHT▋MODE▋DELAY】
▋
▋
Function▋Explanation
When the Flight Mode is changed, the servos may move suddenly, causing a jerky reaction in
flight. To prevent this, it is possible to set a time to each channel separately, during which the servo will move
slowly to the new position when switching Flight Modes. This can be set separately in each Flight Mode.
▋
▋
Setting▋Method
Rotate the dial to select the desired channel in the setting screen, then press the dial to display the time setting
box. The time displayed here will be the time for moving to the servo position of the Flight Mode that is currently
being displayed.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
⿟ If a delay is added to a channel being used for Governor or Gyro, or some function related to another delay
function which has been set, the combination might not work together, depend on the exact settings.
▋ ▋ Caution▋Note
⿟ Actually operate the servos and carefully confirm the settings before flying.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Delay time Flight mode display
Channel display
XG11.indd 44 12/01/19 12:30