Horizon Hobby ??11, Operation Manual

Page: 26 / 124

24
▋ Travel▋adjust【TRAVEL▋ADJUST】
▋ ▋ Function▋Explanation
This function allows independent adjustment of the servo left/right (or up/down) movement, for
each channel. The adjustment is carried out with reference to the neutral position. Adjustment
is possible over an adjusting range between 0 and 150% in each directions. The default value is
100%, and this gives standard servo movement.
▋
▋
Setting▋Method
Rotate the dial to move to, and select, the channel that you wish to set (inverse display). Then
press the dial to display the setting box, and now change the numeric values by rotating the dial.
※ The channel names on the screen will differ according to the model type.
⿟ By moving the appropriate control stick, the numerical values can be independently changed for left and right
(up and down), so that the control surface travel can be individually adjusted. When the cursor is at the inverse
display, the setting values can be modified, and also reset using the CLR key.
▋
▋
Caution▋Note
⿟ Operate the servos and carefully confirm the control surfaces move as expected before flying.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Select the channel.
This screen is for Helicopter type.
Travel for each right and left.
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
XG11.indd 24 12/01/19 12:29