Horizon Hobby ??11, Operation Manual

Page: 81 / 124

79
▋
Trim▋input▋Switch【TRIM▋INPUT▋SWITCH】
▋ ▋ Function▋Explanation
This function allows adjustment of Mixing values or the Sensitivity value for Gyro settings, using
a chosen trim lever. It is a very useful function which enables fine tuning during flight.
▋
▋
Setting▋Method
There are four types of Trim Input switch. The Initial setting of the Trim Lever is “THRO TRIM”
(Note: For Gliders it is “SPOI TRIM”). There is no option for using a Trim Input Switch for “SW
SEL”. For each Trim switch, select which Trim Lever will be used to operate it. Then select which
switches are to be used to turn the Trim Input function On and Off.
Trim Input Switches have different uses depend on each model type. Also note the functionality of the four types
has to be selected before activating the Trim Input.
⿟ For Helicopter
፧ Gyro sensitivity (GYRO SENS) ���� Change Gyro Sensitivity.
፧ Governor (GOVERNOR) ������� Change Rotor r.p.m..
፧ Swash mixing (SWASH MIX) ����� AILE->ELEV ELEV->AILE: Change the value of the Mix.
⿟ For Airplane
፧ Flap System (FLAP SYSTEM) ���� Change the Flap position.
፧ Differential (DIFFERENTIAL) ����� Change the amount of Differential.
፧ Gyro Sensitivity (GYRO SENS) ���� Change the gyro Sensitivity.
⿟ For Glider
፧ Brake System (BRAKE SYSTEM) ��� At Point “0” (Maximum amount of Braking) Change the Mixing amount.
▋
▋
Caution▋Note
⿟ Actually operate the servos and carefully confirm the settings before flying.
⿟ When a Trim input switch is activated the Normal Function of the Trim is inhibited.
System▋List▋
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
XG11.indd 79 12/01/19 12:30