Horizon Hobby ??11, Operation Manual

Page: 3 / 124

1
Introduction
▋
Greetings
Thank you for choosing to purchase this JR product.
This is a highly developed product with outstanding
functionality and ergonomics that concentrates the
essence of the technology built up by this company
through many decades of experience. In order to make
full use of the features of this radio and to safely enjoy
your RC activities, please carefully read this operation
manual.
Our whole company hopes that you will enjoy using this
product for many years.
▋
Features
This is a multi-function 11-channel transmitter that is
capable of supporting many aircraft. It has functionality
normally only seen in more expensive transmitters.
⿟ JR’s newly developed DMSS system maintains high-
speed servo response while allowing simultaneous
use of telemetry functions.
⿟ The high-speed telemetry function allows
information from the aircraft (that was previously
unknown to the user) to be monitored on the
transmitter. In addition, alarms with unique sounds
alert the user to the situation on the aircraft without
even looking at the screen.
⿟ The telemetry sensor connection employs a bus
system that does not require a relay box, allowing
sensor extensions and additions to be easily carried
out. It is acceptable to merely connect the necessary
sensors in parallel.
⿟ A new-generation long-life Li-Fe battery is used
which contributes to a large reduction in transmitter
weight. The charging control circuit is built into the
transmitter.
⿟ Using an automatic safety system, the receiver
will not operate if the correct model has not been
selected in the transmitter before flight.
⿟ The transmitter has an easy to read backlit LCD
display and input keys that are intuitive and easy to
use.
⿟ An E-ring function is incorporated allowing easy
limitation of the operation range of the CCPM swash
plate servos.
⿟ A Trim Input function can allocate trim levers to
change numerical values of various functions (such
as program mix values) during flight.
⿟ A new function synchronizes the operation of servos
on multiple flight control surfaces in real time. This
completely eliminates the time lag with fast control
inputs are required.
⿟ A SD card slot is provided which enables saving
of aircraft model data and updating of transmitter
software to be easily carried out, without connecting
the transmitter to a PC.
⿟ An auto-display function allows digital trim operation
to be preferentially displayed on the screen.
⿟ When inputting numerical values, simultaneously
pressing the function key allows the value to be
changed at a ten-times faster speed.
⿟ A servo speed functions is incorporated for all
channels, and it allows adjustment to be carried out
in each operation direction.
⿟ The 30-aircraft model memory can be utilized for
storing helicopter, airplane, and glider models.
⿟ A Trainer function is incorporated, which also allows
training to be carried out individually for each stick
channel.
⿟ The throttle curve, pitch curve, and curve mixing
use a multiple point adjusting method, and you can
activate an optional exponential curve function that
further smoothes the curves.
⿟ Six systems of multi-function program mixing are
available.
⿟ A Touch Select function is incorporated, which
enables automatic switch selection for programmed
functions. This selection is easily carried out.
⿟ A ‘My List’ screen is provided that enables display
and simple calling up of only functions that the user
has selected.
⿟ Switch arrangement stickers are included for each
transmitter model type so users can change the
switch arrangement stickers as they please for
airplanes and helicopters.
⿟ The stick units have been mounted at a slight angle
so that they can be easily operated in all operating
range extremes.
NEM-B50A
▋ ▋ Specifications▋of▋the▋Transmitter
ITEMS SPEC.
Part Number: NET-P131G
Type of control: 11 channel computer mixing
RF: 2.4GHz
Modulation: DMSS (Dual Modulation Spectrum
System)
Power source: 6.4V Li-Fe battery 2F1400 (1400mA)
Neutral position: 1.5ms
▋ ▋ Specifications▋of▋the▋AC▋adapter
ITEMS SPEC.
Part number:
NEC-A912C
Note: The letter suffix this part
number indicates the type of
power plug.
A: For European plugs
B: For UK, Hong Kong plugs
C: For Canada, USA & Japan plugs
D: For Australia & New Zealand plugs
Input voltage: AC100V-240V 50/60Hz
Output voltage: DC9V 1.3A MAX 12W
XG11.indd 1 12/01/19 12:28