Horizon Hobby ??11, Operation Manual

Page: 92 / 124

90
▋ ▋ For▋Airplane
⿟ Flight Mode Switch (FLIGHT MODE)
Initially, it is set to “INH”. Select the switch to control flight mode selection here.
⿟ Device Select (DEVICE)
Here input devices (switches, levers and trim switches) can be linked to a particular channel. Select the device as desired.
⿟ Selection of output (OUT)
Here the Output configuration of each channel can be specified.
INH: No output.
ACT: Allow output - standard.
SYS: Use this channel for the Flap system.
※ By setting the flap channel to “SYS”, the menu “FLAP SYSTEM” under the function List is activated.
GYR: Use this channel for controlling the Gyro.
※ The settings for the “GYRO SENS” can be set under the function list.
PIT: Use ths channel for controlling Pitch.
※ By setting a channel as the “Pitch Channel”, the “PITCH CURVE” under the function List is activated.
▋ ▋ For▋Glider
⿟ Speed / Launch Switch (SPEED/LAUNCH)
By setting up both a SPEED（Speed Switch）and LAUNCH（Launch Switch）it is possible to set flight Modes.
① SPEED (Speed Switch) By setting a Speed switch, it is possible to use this flight mode.
፧ Speed Mode (SPEED)
፧ Cruise Mode (CRUISE)
፧ Thermal Mode (THERMAL)
LAUNCH（Launch Switch）By setting the Launch switch, it is possible to use this flight mode.
፧ LAND (Landing Mode) ※ Note by a two (2) position switch you are not able to active the Landing Mode.
፧ Cruise Mode (CRUISE)
፧
Launch Mode (LAUNCH)
※ Launch Switch Reverse (LAUNCH REV)
It is possible to switch the Launch Switch position on the Flight Mode switch.
NORM : The Upper switch position（POS 0）will be set as LAND（Landing Mode), and the Bottom switch
position (POS 2), will be set as LAUNCH（Launch Mode).
REV. : The reverses the positions for LAUNCH and LAND – POS 0 becomes LAUNCH (Launch Mode) and POS
2 becomes LAND (Land Mode).
System▋List▋
Flight Mode Extension switch
Flight Mode Switch
Device Select
Selection of output Selection of output
Speed Switch
Selection of output Selection of output
Launch Switch
Launch Reverce Switch
Flight Mode Switch
Device Select
Selection of output Selection of output
Device Select
System▋List▋
XG11.indd 90 12/01/19 12:30