Horizon Hobby ??11, Operation Manual

Page: 35 / 124

33
▋ ▋ For▋Airplane
It is possible to allocate the Pitch curve to any channel using “DEVICE SELECT” on the System List. (Set “OUT” as
“PIT” when activating the function). There are two type of Pitch curve available in airplane mode. By flipping a
switch, flight mode switch, or by using SPS on throttle stick, it is possible to change the pitch curve.
⿟ The numerical value “IN” shows the position of the throttle stick and the numerical value “OUT” shows the output
value to the servo.
⿟ Adjustment is possible over an adjusting range between 0 and 100% for each of the slow to high (up and down)
directions.
⿟ Points 1, 2, and 3 will be influenced by the Hover Pitch Trim and this will be seen on the graph. In addition, the
High Pitch Trim will influence Point H.
▋ ▋ Caution▋Note
⿟ After the setting, operate the servos and carefully confirm each of the Flight Mode settings before flying.
Function▋List
Adjusting point display Current
Flight mode position
Each Adjusting point input
Position and output position
This changes the point
connections to a Curve.
Numerical Display of the Stick input
Position and output position Point addition and deletion
Caution:
Points 1, 2 and 3 will be
influenced in the Hover-
ing pitch trim and also
the graph.
In addition, the High
pitch trim will also be
influenced in Point H.
Normal mode
Stunt mode
Current Flight Mode position
High Pitch Lever usage
Usage Lever
Movement Amount
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
XG11.indd 33 12/01/19 12:29