Horizon Hobby ??11, Operation Manual

Page: 40 / 124

38
⿟ “Calibration for 3 Axis Gyros”
The JR 3 Axis Gyro system (TAGS01) as used for Flybarless R/C helicopters requires “CALIBRATION” prior to
flying. This is required to recognize the type of CCPM being employed, and learn the servo travel ranges used.
Calibration requires precise gimbal stick movement of one function at a time (Elevator or pitch stick up & down,
and Aileron stick right to left). If, for example, the aileron stick is pushed by mistake during elevator calibration,
the calibration will be incorrect. In order to avoid this problem, the calibration function allows single channel
calibration.
⿟ Follow and understand the details of the TAGS01 3 axis gyro manual completely prior to using this calibration
function.
⿟ By using the Trim Input function, it is
possible to change the gyro sensitivity
values using Trim Lever. Therefore, it is
be possible to easily adjust the sensitivity
during flight.
▋
▋
Caution▋Note
⿟ Be sure to understand the Gyro manual
thoroughly to allow correct use of this
function.
⿟ Carefully check the direction of the tail
servo and be sure that everything works
correctly before flight.
Function▋List
Sensitivity Switching delay
Trim Input function
If AUTO is selected, the sensitivity switching
setting for each Flight Mode will be applied.
Further, by operating the switch that you wish
to use, input will be automatically carried out.
Display for corresponding
flight mode
Gyro Mode selection
Setting values and actual output values
NORMAL
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 125%
T.LOCK
T
N
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
TRIPLE AXIS
S
N
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
DUAL GAIN
NORM GAIN
T.LOCK
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 125%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
The upper numerical values are the
setting values.
Gyro sensitivity
ダイヤル
TIPS
調整ポイント表示
ポイント接続を曲線に変更 スティック入力位置と出力位置の数値表示
現在の
フライトモード位置
各調整ポイントの
入力位置と出力位置
ポイントの
追加と削除
注意：
グラフはホバリン
グスロットルやス
ロットルトリムで
変化する場合もあ
ります。
カーブをコピー
Sensitivity Switching delay
Trim Input function
If AUTO is selected, the sensitivity switching
setting for each Flight Mode will be applied.
Further, by operating the switch that you wish
to use, input will be automatically carried out.
Display for corresponding
flight mode
Gyro Mode selection
Setting values and actual output values
NORMAL
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 125%
T.LOCK
T
N
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
TRIPLE AXIS
S
N
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 150%
DUAL GAIN
NORM GAIN
T.LOCK
-150% -100% -50% 0% 50% 100% 150%
0% 50% 100% 125%
0% 50% 100% 150%
-150% -100% -50% 0% 50% 100% 150%
The upper numerical values are the
setting values.
Gyro sensitivity
XG11.indd 38 12/01/19 12:30