Horizon Hobby ??11, Operation Manual

Page: 51 / 124

49
▋
Aileron▋to▋Rudder▋Mixing【AILE → RUDD▋MIX】
▋ ▋ Function▋Explanation
This function allows smooth coordinated turns for scale model aircraft. In addition, in glider
models, the Break function automatically releases this mixing when rudder or elevator operation
is sensed.
▋
▋
Setting▋Method
▋ ▋ For▋Airplane
It is possible to set two different Mixing amounts from Aileron to Rudder, and is possible to allocate the switch as
desired, or use the flight mode switch. It is also possible to couple the Throttle stick to change the settings.
⿟ Throttle stick (Coupling function) (THRO STK)
It is possible to use the throttle stick to select between two desired positions. By default this is set to INH – please
activate as necessary.
▋ ▋ For▋Glider
It is possible to set independent Mixing for right and left Aileron to Rudder in each flight mode. Input the desired
mixing amount for each flight mode.
⿟ Break Function (BREAK)
The “BREAK” setting on the elevator and rudder stick releases the mixing.
▋ ▋ Caution▋Note
⿟ Actually operate the servos and carefully confirm the settings before flying.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Mixing amount
Throttle stick coupling function (THRO STK)
Flight Mode
Break Differential Function (BREAK)
Mixing amount
Throttle stick coupling function (THRO STK)
Flight Mode
Break Differential Function (BREAK)
XG11.indd 49 12/01/19 12:30