Horizon Hobby ??11, Operation Manual

Page: 57 / 124

55
▋
Motor▋System【MOTOR▋SYSTEM】
▋ ▋ Function▋Explanation
This function is used to switch off (HOLD) the motor channel by using the Gear switch (default)
or by selecting various flight mode positions. By using the Delay function, it is possible to smoothly run the motor
from low r.p.m. to higher r.p.m. in a linear transition (Note: The speed controller must have a linear transition to
activate this function).
▋ ▋ Setting▋Method
In order to activate this function, it is necessary to set the “GEAR” channel or “AUX3” channel as “MOTO ” under
the System List.
⿟ Hold Delay (HOLD DELAY)
UPPER ARROW ( ↑ ) : Delay time before switching on the motor.
DOWN ARROW ( ↓ ) : Delay time before switching off the motor.
▋
▋
Caution▋Note
⿟ Be sure to set the “WARNING” function under the system list and be aware of the motor starting unexpectedly. It
is very easy to accidently turn on a switch and the motor start, and not immediately realize why.
⿟ Set the speed controller to run the motor and carefully confirm the settings before flying.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Hold Delay (HOLD DELAY)
Hold Position
XG11.indd 55 12/01/19 12:30