Horizon Hobby ??11, Operation Manual

Page: 84 / 124

82
▋
Transmitter▋Setting【TX▋SETTING】
▋ ▋ Function▋Explanation
This function allows basic adjustment of transmitter settings such as LCD display mode, sound
(audio) mode, etc.
▋
▋
Setting▋Method
⿟ LCD Back light (BACK LIGHT)
The LCD Back light can be set to function in one of three modes.
1) AUTO (Lit for 30 seconds & then automatically shuts off)
2) ON (Always on lit)
3) OFF (Always off)
⿟ LCD contrast (CONTRAST)
The LCD Contrast can be changed between numerical values of ± 20.
⿟ Idle Alert (ILDE ALERT)
This function ensures the operator does not forget to turn off the transmitter. The idle (inactivity) time can be set
to four different settings.
1) INH
2) 10min
3) 30min
4) 60min
⿟ Low battery warning (LOW BATT.VOL)
This sets the voltage at which the Low battery alert triggers. Initially, it is set to 6.0V.
⿟ Audio Mode (SOUND MODE)
It is possible to change the audio pitch (or mute) for the following functions.
፧ Edit
፧ Trim step
፧ Side Lever Neutral center
፧ Timer sound
፧ Opening sound (Sound when the transmitter is first turned on)
⿟ Software version (SOFTWARE VER)
This indicates the current version of the transmitter’s software. For example: 0001-0000（Ver1.0）
⿟ Servo Hold Warning (SERVOS HOLD WARNING)
This is the warning to inform the pilot that the function they are about to program should be adjusted with all of
System▋List▋
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
XG11.indd 82 12/01/19 12:30