Horizon Hobby ??11 Operation Manual Download Page 68

Page: 68 / 124

▋

For▋Airplane

Channel name

Items which can be Included

Ch1: Throttle (THRO)
Ch2: Aileron (AILE)

Aileron Differential (AILE DIFF.)

Ch3: Elevator (ELEV)
Ch4: Rudder (RUDD)

Rudder Differential (RUDD DIFF.)

Ch5: Gear (GEAR)
Ch6: Flap (FLAP)
Ch7: AUX2
Ch8: AUX3
Ch9: AUX4

Ch10: AUX5
Ch11: AUX6

ETC: FPRN

When the Wing type is set to “DUAL AILE” or “4-AILE” it is possible to mix to the Flap from

Aileron.

RTHR

When the Wing type is set as “TWIN ENGINE” (Twin Engine) it is possible to mix to the Right

Throttle.

LTHR

When the Wing type is set as “TWIN ENGINE” (Twin Engine) it is possible to mix to the Left

Throttle.

AILV

When the Wing type is set as “DUAL ELEV” it is possible to mix to the Aileron from Elevator.

And it is also possible to include Aileron Differential (AILE DIFF.) in the mix.

RDVT

When the Wing type is set to “DUAL RUDD” it is possible to mix to the elevator from Rudder.

FLAI

When the Wing type is set to “DUAL FLAP”, it is possible to mix to the Aileron from Flap. And

it is also possible to include Flap Differential (FLAP DIFF.) in the mix.

PIT.

It is possible to provide the mixing to the Motor Channel from PIT.

▋

For▋Glider

Channel name

Items which can be Included

Ch1: Flaperon (FPRN)
Ch2: Aileron (AILE)

Aileron Differential (AILE DIFF.)

Ch3: Elevator (ELEV)
Ch4: Rudder (RUDD)

Rudder Differential (RUDD DIFF.)

Ch5: Gear (GEAR)
Ch6: Flap (FLAP)
Ch7: AUX2
Ch8: AUX3
Ch9: AUX4

Ch10: AUX5
Ch11: AUX6

ETC: AILV

When the Wing type is set to “DUAL ELEV” (Dual Elevator) it is possible to mix to Aileron

from Elevator. And it is also possible to include Aileron Differential (AILE DIFF.) in the mix.

RDVT

When the Wing type is set to “DUAL RUDD” it is possible to mix to Elevator from Rudder.

FLAI

When the Wing type is set to “DUAL FLAP” (Dual Flap) it is possible to mix to Aileron to the

Flap And it is also possible to include Flap Differential (FLAP DIFF.) in the mix.

SPRD

When the Wing type is set to “DUAL SPOI” it is possible to mix to Rudder from Spoiler.

MOTO

It is possible to mix to the available Channel from the allocated channel for Motor control.

▋

Caution▋Note

⿟

Actually operate the servos and carefully confirm the settings before flying.

Function▋List

XG11.indd 66

12/01/19 12:30

Summary of Contents for ??11





























































































































Search results

Summary of Contents for ??11

Reviews:

Related manuals for ??11

Brands by name

Popular brands

Horizon Hobby ??11, Operation Manual

Search results

Summary of Contents for ??11

Reviews:

Related manuals for ??11

Brands by name

Popular brands