Horizon Hobby ??11, Operation Manual

Page: 29 / 124

27
▋ Reverse▋Switch【REVERSE▋SW】
▋ ▋ Function▋Explanation
This function reverses the servo operating direction (pulse change direction) of each channel.
▋
▋
Setting▋Method
Rotate the dial to move to and select the channel that you wish to change (inverse display). Then
press the dial to select the rotation direction. “NORM” is the normal direction and “REV” is the
reverse direction. Actually operate the servos and carefully confirm the settings before flying.
※ The channel names on the screen will differ according to the model type.
Function▋List
DANGER
CAUTION
Helicopter
Airplane
Glider
WARNING
Direction of Selected Channel Select the channel.
This screen is for Helicopter type.
IMPORTANT NOTICE
In the situation where the reverse switch setting has
been changed the Fail Safe has been set, because
this will also affect the Fail Safe operation, it will
operate in the opposite direction to the condition
that was set.
Accordingly, in the situation where the Fail Safe has
operated after the throttle channel has been set to
reverse by setting the reverse switch in the aircraft
body, the servo will be set to the Full High side,
which will be extremely dangerous.
After finishing the transmitter settings, be sure to
implement the Fail Safe settings (Match the stick
to the position that you wish to set and press the
Memory key), and be certain to carry out operation
confirmation. (Switch off the transmitter once, and
check whether the servo movement reaches the
correct position.)
XG11.indd 27 12/01/19 12:29