horiba ABX MICROS ES60, User Manual

Page: 105 / 200

Quality assurance
User Manual - RAB237AEN 5–7
Control identification
1- Press " Lot number " field to select it and enter the control lot number.
2- Read the contol label by means of barcode reader or type the control lot number using the virtual
keyboard or an external keyboard (if one is connected).
3- Press " Name " field to select it and enter the control name.
4- Type the control name in the " Name " field using the virtual keyboard or an external keyboard (if
one is connected).
5- Once the control blood is identified, it has to be set: See Control setting, page 5-7 .
Control setting
In the " Control Modification " screen:
1- Press " Expiry date " field to select it to set the control blood expiration date.
2- Type the control blood expiration date in the " Expiry date " field using the virtual keyboard or an
external keyboard (if one is connected).
◆
The expiration date must be given as a date with the date format set in the " Settings " menu (See
Section 6, 3.4. Date format setting, page 6-5 ).
3- Press " InterQC timelimit " field to select it and set the maximum time allowed between 2 control
runs using the virtual keyboard or an external keyboard (if one is connected). By default is 24 hours.
◆
The time between two control runs is given in hours.
4- To validate the control creation: See Control creation validation, page 5-7 .
Control creation validation
1- Press " Close " key to close the virtual keyboard if it is opened.
2- Press " OK " button in the " Control Modification " screen.
◆
The new control is created. It can be modified as long as no control analysis is running on it.
◆
Your own target values need to be entered.
3- To enter control target values: See Entering control target values, page 5-7 .
Entering control target values
In the " Control Modification " screen.
1- Press " Targets " button ( Diag.5-6 ).
◆
The " Target Modification " screen is displayed.
2- Press " Edit " button.
3- Press corresponding radio button to select a parameter family.
Diag.5-6 Target button
Diag.5-7 Target modification screen