horiba ABX MICROS ES60, User Manual

Page: 143 / 200

Set up
User Manual - RAB237AEN 6–15
7. Parameter settings
7.1. Parameters tab description
◆
Enter menu " Maintenance\Serv.\Settings\Param. "
The " Param. " tab allows to set:
◆
Which results can be printed and/or uploaded: See 7.2. Result settings, page 6-15 .
◆
Which parameter can be printed and/or uploaded: See 7.3. Parameter settings, page 6-15 .
◆
Which information will be displayed on header result reports: See 7.4. Report header settings,
page 6-16 .
7.2. Result settings
◆
The " Config. " screen allows the user to select the results that will be printed or sent.
In the " Param. " tab:
1- Press " Config. " radio button.
2- Press " Edit " button.
3- Set the following items: normal range (See Normal range, page 6-15 ), curves (See Curves, page
6-15 ), patient results (See Automatic patient result, page 6-15 ), QC results (See Automatic QC
result, page 6-15 ) and temperature (See Temperature, page 6-15 ).
4- When results have been set: press " OK " button.
Normal range
◆
Check the corresponding " Print " check box to allow analysis limits printing.
The analysis limits can only be printed on an external printer.
Curves
◆
Check the corresponding " Print " check box to allow curves printing.
◆
Check the corresponding " Upload " check box to allow curves sending.
Automatic patient result
◆
Check the corresponding " Print " check box to activate automatic printing of patient results.
◆
Check the corresponding " Upload " check box to activate automatic sending of patient results.
Automatic QC result
◆
Check the corresponding " Print " check box to activate automatic printing of QC results.
◆
Check the corresponding " Upload " check box to activate automatic sending of QC results.
Temperature
◆
Check the corresponding " Print " check box to activate automatic printing of analyser temperature.
7.3. Parameter settings
◆
The " Parameters " screen allows to set which parameters can be printed or sent.
In the " Param. " tab:
1- Press " Parameters " radio button.
2- Press " Edit " button.
3- For each parameter:
◆
Check the corresponding " Print " box to allow the parameter printing.
◆
Check the corresponding " Upload " box to allow the parameter sending.
Parameter settings can only be done by a user with a " Scientist " profile.