horiba ABX MICROS ES60, User Manual

Page: 194 / 200

ABX Micros ES60 OT/CT
7–46 User Manual - RAB237AEN
Analyser
QC
Barcode reader
Mechanical and service cycles
Ticket printer do not answer (timeout)
- Check if ticket printer is online. If not, switch it on.
- Check if there is enough paper.
- Restart the instrument.
Ticket printer initialisation failed.
- Check if ticket printer is online. If not, switch it on.
- Check if there is enough paper.
- Restart the instrument.
Message Possible cause/Corrective action
Analyser connection failed (internal
RS232).
Internal communication error:
- Contact your local HORIBA ABX Technical Support
Representative for assistance.
Analyser com port initialisation failed
Internal communication error:
- Contact your local HORIBA ABX Technical Support
Representative for assistance.
Message Possible cause/Corrective action
Previous invalid QC result automatic
deletion. Invalid QC result is deleted when directly followed by a QC
passed result.
QC file write error.
Internal read/write error:
- Contact your local HORIBA ABX Technical Support
Representative for assistance.
QC control not found
Impossible to found a QC with this ID.
- Check the control lot number.
Message Possible cause/Corrective action
Bar code reader initialisation failed
Barcode reader initialization failure in the sample
identification screens.
- Restart the instrument
- Contact your local HORIBA ABX Technical Support
Representative for assistance.
Cannot configure bar code reader.
Error during the barcode reader serial port opening
- Restart the instrument
- Contact your local HORIBA ABX Technical Support
Representative for assistance.
Cannot connect to bar code reader.
Error during the barcode reader initialization.
- Restart the instrument
- Contact your local HORIBA ABX Technical Support
Representative for assistance.
Bar code reader cannot read. Error during the barcode reader functionning.
Message Possible cause/Corrective action
Carriage positioning mechanic cycle
failed
Error during carriage motion check cycle
- Manually check the mechanical movement
- Run a startup cycle by pressing the "
Startup " button.
Diluter positioning mechanic cycle
failed
Error during diluter motion check cycle
- Manually check the mechanical movement
- Run a startup cycle by pressing the "
Startup " button.
Message Possible cause/Corrective action