background image

ABX Micros 

ES60

 OT/CT

5–8

User Manual - RAB237AEN

4-

Enter "

Target

" and "

Tolerance

" values for each parameter in the corresponding fields:

- Press value fields to select them.
- Type the control target values in the fields using the virtual keyboard or an external keyboard
(if one is connected).

- Press "

Close

" key to close the virtual keyboard if it is opened.

- In the "

Target Modification

" screen, press "

OK

" button.

- Press "

Back

" button to return to the "

Control Modification

" screen.

2.3.3. Control closing

1-

Press "

Quality control menu

" button to access the "

Quality control

" menu.

2-

Press corresponding radio button to select the control to close.

3-

Press "

Delete

" button.

The following confirmation message is displayed: "

Are you sure to want to close this control?

"

4-

Press "

OK

" button.

When using the virtual keyboard, values can be entered only for one 
parameter family at a time. Close the virtual keyboard,
 then press 
corresponding radio button to select another parameter family.

Diag.5-8 Delete button

Closed control lots are kept for one year on the analyser. 
Once a control is closed, the "

Status

" button blinks. The "

Status

" area informs 

the user that this control can be archieved by using a USB key (See Section 7, 

4.3.2. Archives creation, page 7-26

).

Once archived, the control results can be consulted on an external computer.

Summary of Contents for ABX MICROS ES60









































































































































































































Reviews: