Honda CB HORNET 160R 2015, Shop Manual

Page: 86 / 336

5-14
FUEL SYSTEM
Check that the spring installed correctly by pushing the
bottom of the piston with your finger and make sure that
the piston returns back in place smoothly.
Install the 2 screws of the vacuum chamber cover before
releasing the vacuum piston.
Tighten the two screws.
TORQUE: 2.1 N·m (0.2 kgf·m, 1.6 lbf·ft)
Install the two screws and throttle cable stay.
Tighten the two screws.
TORQUE: 3.4 N·m (0.4 kgf·m, 2.5 lbf·ft)
INSTALLATION
Install the carburetor to the connecting hose and insulator.
Loosely tighten the insulator band screw and air cleaner
connecting boot band screw.
Connect the one way valve hose.
Be careful not
to pinch the
diaphragm
under the
chamber cover,
and to keep
the spring
straight when
compressing the
spring.
Take care of
the direction of
the band screw
while installing
as shown.
SCREWS
VACUUM CHAMBER COVER
VACUUM PISTON
COMPRESSION SPRING
SCREWS
THROTTLE CABLE STAY
INSULATOR
SCREW
BAND
SCREW
ONE WAY
VALVE HOSE
CARBURETOR