Honda CB HORNET 160R 2015, Shop Manual

Page: 82 / 336

5-10
FUEL SYSTEM
STRAINER SCREEN
CARBURETOR CLEANING
Blow open the fuel passage from the valve seat side with
compressed air and clean the strainer screen.
VALVE SEAT
Blow open each air and fuel passages in the carburetor
body using compressed air.
Check each part for wear or damage, and replace them
if necessary.
CARBURETOR ASSEMBLY
CARBURETOR BODY
2.1 N·m (0.2 kgf·m,
1.6 lbf·ft)
DRAIN SCREW
1.5 N·m (0.2 kgf·m,
1.1 lbf·ft)
SE VALVE
COVER
VACUUM
CHAMBER
COVER
STAY
SPRING
O-RING
O-RING
O-RING
FLOAT PIN
FLOAT
FLOAT VALVE
FLOAT
CHAMBER
GASKET
WASHER
WASHER
SPRING PILOT SCREW
SPRING
SPRING
JET NEEDLE
DIAPHRAGM/
VACUUM PISTON
THROTTLE STOP
SCREW
SLOW JET
1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
MAIN JET
2.1 N·m (0.2 kgf·m, 1.6 lbf·ft)
NEEDLE JET HOLDER
2.5 N·m (0.3 kgf·m, 1.8 lbf·ft)
NEEDLE
HOLDER
2.1 N·m (0.2 kgf·m, 1.6 lbf·ft)
3.4 N·m (0.4 kgf·m, 2.5 lbf·ft)
3.4 N·m
(0.4 kgf·m, 2.5 lbf·ft)