Honda CB HORNET 160R 2015, Shop Manual

Page: 28 / 336

1-24
GENERAL INFORMATION
EVAPORATIVE EMISSION CONTROL SYSTEM
This device collects the fuel vapour from the fuel tank and is routed into the evaporative emission canister, where it is absorbed and
stored while the engine is stopped. When the engine is running and evaporative emission (EVAP) one way valve is open, fuel vapour in
the canister is drawn into the engine through the carburetor for reburning to avoid air pollution caused by fuel vapour diffused into the air.
No adjustment to the canister or the one way valve is required.
AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE ACTS LISTED BELOW:
1.
Removal of or puncturing of the muffler, header pipes or any other component which conducts exhaust gases.
2.
Removal of or puncturing of any parts of the intake system.
3.
Lack of proper maintenance.
4.
Replacing any moving parts of the vehicle, or parts of the exhaust or intake system, with parts other than those specified by the
manufacturer.
FUEL TANK
EVAP CANISTER
FRESH AIR
FUEL VAPOUR
EVAP ONE WAY VALVE
CARBURETOR