Honda CB HORNET 160R 2015, Shop Manual

Page: 100 / 336

6-4
ENGINE REMOVAL/INSTALLATION
Support the engine using a jack or other adjustable support
to ease of engine hanger bolts removal.
Remove the following:
– Front engine hanger bolts and nuts
– Plate bolts and nuts
– Front engine hanger plate
The jack
height must
be continually
adjusted to
relieve stress
for ease of bolt
removal.
Remove the rear engine hanger bolts and nuts first lower
then upper.
Remove the engine from the frame.
During engine
removal, hold
the engine
securely not
to damage
the frame and
engine. use
masking tape on
frame to save
from scratches.
ENGINE INSTALLATION
• Place the jack or other adjustable support under the
engine.
• The jack height must be continually adjusted to relieve
stress for ease bolt installation.
• Carefully align the mounting points with the jack to
prevent damage to engine, frame, wires and cables.
• All the engine mounting bolts and nuts loosely install,
then tighten the bolts and nuts to the specified torque.
• Route the wires and cables properly.
During engine
installation,hold
the engine
securely and
be careful not
to damage
the frame and
engine.
Place the engine in the frame.
Install the rear engine hanger bolts and nuts, but do not
tighten it yet.
FRONT ENGINE
HANGER BOLTS/NUTS
PLATE
BOLTS/ NUTS
BOLTS/NUTS
BOLTS/NUTS