Honda CB HORNET 160R 2015, Shop Manual

Page: 61 / 336

3-23
MAINTENANCE
SIDE STAND
Support the motorcycle on its center stand.
Check the side stand spring for damage or loss of tension.
Check the side stand operation for freedom of movement
and lubricate the side stand pivot if necessary.
Make sure the side stand is not bent.
SUSPENSION
FRONT SUSPENSION INSPECTION
Check the action of the forks by operating the front brake,
and pressing the front suspension several times.
Check the entire assembly for signs of leaks, damage or
loose fasteners.
Replace the damaged components which cannot be
repaired.
Tighten all nuts and bolts.
Refer to (page 12-14) for fork service.
Loose, worn
or damaged
suspension
parts impair
motorcycle
stability and
control.
REAR SUSPENSION INSPECTION
Check the action of the rear shock absorber by pressing
the rear end several times.
Check the entire shock absorber assembly for signs of
leaks, damage or loose fasteners.
Replace the damaged components which can not be
repaired.
Tighten all nuts and bolts.
Refer to (page 13-12) for shock absorber service.
Loose, worn
or damaged
suspension
parts impair
motorcycle
stability and
control.
SPRING
SIDE STAND
ADJUSTMENT
Adjustments are performed at the clutch lifter arm.
Loosen the lock nut, and turn the adjusting nut.
After adjustment, tighten the lock nut by holding adjusting
nut.
Check the clutch operation.
If the proper free play cannot be obtained, or the clutch
slips during the test ride, disassemble and inspect the
clutch (page 9-8).
ADJUSTING NUT LOCK NUT