Cenova Image Analytics Server 3.0 Installation & Service Manual
Chapter 5: Service Procedures
Page 98
MAN-05205 Revision 003
Install the Cenova server software by running the installer executable file (see
on page 28 for complete instructions).
To restore the configuration settings:
1.
Restore the Cenova Control Panel settings (see
Backing Up and Restoring the Server
on page 77), then step through all configuration screens to verify the settings
are correct.
2.
Restart the Hologic Connect service (see
Configuring the Hologic Connect Service
page 65).
3.
Run the Self Test (see
on page 81).
4.
on page 69).
Note
If DICOM 6000 Interface is installed on the Cenova server, refer to the DICOM
6000 Interface Installation & Service manual to reinstall DICOM 6000 Interface
and reconfigure per the recorded settings.
