Cenova Image Analytics Server 3.0 Installation & Service Manual
Chapter 1: Introduction
MAN-05205 Revision 003
Page 7
1.3.3 Electromagnetic Emissions
Important
Observe the following instructions provided to ensure correct results and optimal
performance:
•
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates and can radiate radio frequency energy and, if not installed in
accordance with the procedures in this manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to
correct the interference at the user’s own expense.
•
This equipment can be affected by electromagnetic emissions coming from
nearby equipment, which in some cases, can cause the equipment to
malfunction. The equipment has been tested to the limits of International
Electrotechnical Commission (IEC) standard CISPR 22:1997. (‘CISPR’ is the
International Special Committee on Radio Interference.)
Important
Do not install the Cenova server in a room with magnetic resonance imaging (MRI)
equipment. The emissions from an MRI room can interfere with proper operation.
