Cenova Image Analytics Server 3.0 Installation & Service Manual
Chapter 3: Installing the System
MAN-05205 Revision 003
Page 59
Configuring Processing – Tomo CAD
Use the Processing – Tomo CAD screen to specify processing settings for the
ImageChecker 3D Calc CAD application. The settings must be determined through
consultation with clinical staff when you install the application. Once established, you
can adjust the settings as needed.
To set ImageChecker 3D Calc (Tomo) CAD options:
1.
Consult with the site clinical staff to determine the settings.
2.
Click
Tomo CAD
. The Processing screen appears.
3.
Select the appropriate settings for the ImageChecker 3D Calc CAD application.
Note
If the Calcifications option is not selected, the SC-TOMO output is sent to the
workstation without ImageChecker 3D Calc CAD results.
4.
Click
Apply
to confirm the settings.
